Demagnetizing Equipment (Coil-passing Styled Demagnetizer)

Our coil-passing styled demagnetizer, using full-waved current wave form for demagnetizing, is thereby characterized with zero-interference in electrical network, low power loss and high interference-resistivity, it is widely used for demagnetizing such products as mechanical parts, hardwares, automobile accessories, magnet-related products, workpiece, bearing or other elements.

PCT-5030TS coil-passing styled demagnetizer, equipped with belt conveyor, is suitable for quantity demagnetizing application, it is high efficient and easy operating, with an adjustable conveying rate ranging from 0 to 10 m/min, boasting for its high safety in operating and good effectiveness in demagnetization.

Technical Parameters:

1. Application range: to demagnetize metal steel parts, workpieces, molds etc.
2. Demagnetization voltage(V):~380V
3. Operating time of demagnetization(s):5~30(dependent on different lengths)
4. Working current(A): <30A
5. Magnetic field domain for demagnetization: 560mm×500 mm×380mm
6. Suitable width and height of the workpiece to be demagnetized: 500mm×300mm (after equipped with belt conveyor)
7. Speed of the conveyor: 0-10m/min ( adjustable by frequency converting)
8. Conveying direction: positive/reverse
9. No limit to the length of workpiece
10. Remanence field: <0.3mT
11. Dimension of Mainframe: 900mm(L)×300 mm (W)×620mm(H)
12. Dimension of the stand for mainframe: 860mm(L)×500 mm (W)×410mm(H)
13. Dimension of the belt conveying device:2000mm×560mm×700mm (width of belt:500mm)
14. Working power supply: ~380V/50Hz(diphase three-wire mode)
15. Power:<15kw
16. Weight: 160kg mainframe
17. 240kg belt conveying device

For more detail info, please feel free to enquire us at any of your convenience.